Which torque wrench - 1/2 or 3/8 inch?

Parts, bike builds, tools, tips and maintenance.
User avatar
marc2131
Posts: 1120
Joined: 03 Jul 2011, 13:14
Location: Ashbury
Contact:

Postby marc2131 » 03 May 2015, 08:13

Someone is buying a Giant Propel in the next few weeks :P
Want to invest in a proper Torque Wrench. Notice there are one-quarter inch and three-eighth inch sets available for purchase.
Which one should be purchased?
Last edited by marc2131 on 03 May 2015, 10:55, edited 1 time in total.

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 03 May 2015, 09:54

You need to buy one that's specific to cycling. The ones at bunnings etc don't have the precision to work with CF

This is the one I have

Image

User avatar
marc2131
Posts: 1120
Joined: 03 Jul 2011, 13:14
Location: Ashbury
Contact:

Postby marc2131 » 03 May 2015, 10:09

Was thinking of something like this from Torpedo7.
http://www.torpedo7.com.au/products/T7T ... wrench-set

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 03 May 2015, 14:37

That's the same one as mine. The identical product is available in multiple brands

User avatar
marc2131
Posts: 1120
Joined: 03 Jul 2011, 13:14
Location: Ashbury
Contact:

Postby marc2131 » 03 May 2015, 19:02

So does it matter if one gets a half inch or three-eighth inch set?

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 03 May 2015, 20:35

The amount of torque applied is not going to be a consideration so you don't need to worry about the head size unless you want it to be the same as your existing socket set. The torque range should go as low as 4nm

My set is 1/4" and to be honest I had to go and look at it to know that, the head size is not really a consideration

User avatar
marc2131
Posts: 1120
Joined: 03 Jul 2011, 13:14
Location: Ashbury
Contact:

Postby marc2131 » 04 May 2015, 05:54

Thanks Mike

Jdubs
Posts: 121
Joined: 09 Oct 2013, 11:47

Postby Jdubs » 04 May 2015, 10:53

What? Marc is moving to carbon? Shock horror.

If you want to go cheap Marc? The lifeline branded ones are $50 or less at wiggle.

User avatar
marc2131
Posts: 1120
Joined: 03 Jul 2011, 13:14
Location: Ashbury
Contact:

Postby marc2131 » 04 May 2015, 14:29

Carbon? Wat's dat?

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 04 May 2015, 18:12

What? Marc is moving to carbon? Shock horror.

If you want to go cheap Marc? The lifeline branded ones are $50 or less at wiggle.
This one? $85 with sockets

http://www.wiggle.com.au/lifeline-profe ... ue-wrench/

User avatar
Adrian E
Posts: 1163
Joined: 07 Mar 2007, 13:15
Location: Newtown

Postby Adrian E » 09 May 2015, 01:02

For most carbon parts a torque wrench with a quarter inch driver will work best. Torque wrenches are designed to be accurate in the middle of their range. I.e 3 to 20nm will cover most fasteners on a bike. You only need a large torque wrench for things like bottom brackets and cassette lock rings. I have seen several carbon bikes damaged using a torque wrench incorrectly. The most important part of the tool is using it correctly.

http://m.pinkbike.com/news/To-the-Point ... -2013.html


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 0 guests