I'm just wondering if anyone knows about http://www.tokyowheel.com, or knows someone who may have a set. I'm hoping to upgrade to some nicer wheels than my stock Bontragers that came with my bike. I stumbled across this company by chance and they seem fairly legit, just never really heard of them. Does $984.59 for a set of full carbon 50mm, skewers, appropriate brake pads etc seem too good to be true?
They're no Mavic, ENVE or other well known wheel maker, so the price may be a way of getting into the market.
These are what I have my eyes on: http://www.tokyowheel.com/products/epic ... lset#specs
Am I a victim of a very convincing scam? Or have I found a little gem? A second opinion would be greatly appreciated! Thanks guys!
Tokyo Wheels - Second Opinion?
PJ, I don't know them. I can attest to Shimano RS80 C50 alu/carbon clinchers. They are 300gms heavier and $200 cheaper however they certainly stop in the wet. good luck and your choice and I full handling report would be good if you decide to buy a set of Tokyowheels.
cheers
Dougie
cheers
Dougie
I wouldn't get carbon wheels for training unless you never ride in the wet, or just don't like stopping. They are also very wide for clincher rims, you would need to check your brake clearance. I'm sure others will have opinions on carbon clinchers but I'd be looking for a good aluminium rim with good hubs.
I'm a little allergic to factory wheels as they sometimes use very specific spokes that can be expensive if you snap one.
I'm a little allergic to factory wheels as they sometimes use very specific spokes that can be expensive if you snap one.
-
- Posts: 74
- Joined: 04 Nov 2011, 16:29
Ok thanks guys. Good advice. I'm not going to rush out for these. I do think going with a familiar name is a better option. The wheels I have are good for now so I'll keep rolling on these. Thanks again!
- mikesbytes
- Posts: 6991
- Joined: 13 Nov 2006, 13:48
- Location: Tempe
- Contact:
Another option is to wait for a special on a brand name wheels. I got a good price on a fast forward wheel at Bike Bug about a month ago
If you can actually buy them. I have two that I have to modify the spokes from other wheelsets because they don't make them anymore. They're like six years old!I'm a little allergic to factory wheels as they sometimes use very specific spokes that can be expensive if you snap one.
- JoTheBuilder
- Posts: 1500
- Joined: 19 Feb 2011, 15:32
Having broken a spoke this morning and being told they are out of stock at Shimano, and then being told Shimano can take up to a month to get more in, I would heartily suggest you buy wheels with industry standard parts!
-
- Posts: 74
- Joined: 04 Nov 2011, 16:29
Wow, Shimano out of stock! I would have thought they'd have spares of everything for years, and be industry standard. Hmm, interesting. My new mission is to find a brand that has backups if needed. Lots to consider.
- James Rogers
- Posts: 457
- Joined: 13 Nov 2011, 09:58
- Location: Newtown
Told to me by an anonymous bike shop person: "Apparently Shimano Australia's problem is that if they kept stuff in stock, they'd actually have to sell you something. And that selling process can be a hassle."
- JoTheBuilder
- Posts: 1500
- Joined: 19 Feb 2011, 15:32
Yup. Was told a very similar story this morning. By TWO different stores. The joke is the Shimano ad has one of each component on the poster - 1 brake lever, 1 derailleur, 1 shifter - because that is the entire inventory in their warehouse.Told to me by an anonymous bike shop person: "Apparently Shimano Australia's problem is that if they kept stuff in stock, they'd actually have to sell you something. And that selling process can be a hassle."
J bend... yes please.
Re: the tokyo wheels, the basic models look like a mix of pillar spokes and formula hubs. Nothing wrong with that, but I couldn't attest to quality of the rims or the wheel build. I really don't see much benefit in going carbon except for racing.
Jo, when I've had trouble with Shimano Australia, this is were I've gone. If I can get the spoke, I'll fix it up for you.
http://www.moruyabicycles.com.au/conten ... imano.html
Re: the tokyo wheels, the basic models look like a mix of pillar spokes and formula hubs. Nothing wrong with that, but I couldn't attest to quality of the rims or the wheel build. I really don't see much benefit in going carbon except for racing.
Jo, when I've had trouble with Shimano Australia, this is were I've gone. If I can get the spoke, I'll fix it up for you.
http://www.moruyabicycles.com.au/conten ... imano.html
-
- Posts: 74
- Joined: 04 Nov 2011, 16:29
Thanks for your help guys. Much appreciated feedback. Unfortunately there's been a veto by the finance director on the purchase of new wheels. Bonus money is now being directed to household furnishings. Next year
Who is online
Users browsing this forum: No registered users and 6 guests