A spare road bike to loan?

Parts, bike builds, tools, tips and maintenance.
John Mason
Posts: 46
Joined: 02 Dec 2013, 21:04

Postby John Mason » 22 Mar 2015, 18:50

I've had a week of disaster in the shed.

First, took the Bianchi to the shop for a new headset, and for a second opinion on some hairline cracks appearing in the paint on the chain stays just ahead of the dropouts. Turns out the frame is cracked in several places. I'll start the potentially prolonged process of a warranty claim this week.

Then, dusted off the Blom and went out training on Thursday. Washed it yesterday and found a crack in the down tube - not too bad after 34 years I suppose.

The final fall back option is my dad's early 80's Geering. Burnt the midnight oil last night so I could do the RNP run this morning. Got back home to find a chain stay had separated from the bottom bracket lug.

Bad luck comes in threes, so i am not expecting any more cracked frames - but there are none left in the shed!

Does anyone have a spare road bike frame, or a spare road bike sitting around that I could borrow while i sort out the Bianchi claim?

i fit a frame with a 55, or 55.5 or 56 cm top tube.

I''ve entered the Blayney to Bathurst for the first time, and keen not to miss out. I have a fair few parts in the shed, so if the bike is not complete that may not be a problem.

thanks,

John M

Johnj
Posts: 164
Joined: 12 Feb 2011, 19:03
Location: Croydon

Postby Johnj » 22 Mar 2015, 19:10

Hi John

I've got a steel Omega I can lend. 56-ish top tube. Currently running 8-speed Shimano 600 with downtube shifters. Has done several time trials and other rides with a variety of riders. The Weinmann Delta brakes are not terribly effective, but nobody has died riding it yet.

I think its got a flat front tyre, but other than that its probably ready to go.

Cheers

John

User avatar
Stuart
Posts: 2568
Joined: 11 Mar 2008, 10:43
Location: Dulwich Hill

Postby Stuart » 23 Mar 2015, 08:45

I have a 56cm TT 2008 Alu Merida Road Lite with 10 speed Ultegra and compacts. Currently needs the left shifter put back on and re-cabled. Brakes need re-cabling too (they are off of my Pinni - I swapped them for the Ultegras) - I have the brake cables. You'll need some wheels.

User avatar
Dougie
Posts: 755
Joined: 11 Jan 2008, 16:39
Location: Dulwich Hill

Postby Dougie » 23 Mar 2015, 09:17

I have a 52cm ready to roll out the door. just think, you could be fully pro with this tiny set up!

Eleri
Posts: 1753
Joined: 31 Dec 2009, 08:43
Location: Erskineville

Postby Eleri » 23 Mar 2015, 19:51

I've got even smaller bikes than Dougie ... Fancy a 47.5 top tube? With race wheels if you want to borrow them too. :D

John Mason
Posts: 46
Joined: 02 Dec 2013, 21:04

Postby John Mason » 24 Mar 2015, 18:24

Thanks Stuart, I'll take you up on your offer, and will be in touch.

Thanks everyone else for the offers, both large and small.

John

User avatar
Philip
Posts: 531
Joined: 12 Feb 2012, 17:48
Location: Earlwood
Contact:

Postby Philip » 25 Mar 2015, 08:34

54 inch cannondale CAAD10 duraace 10 speed. fits me and I'm 180 cm.

User avatar
Philip
Posts: 531
Joined: 12 Feb 2012, 17:48
Location: Earlwood
Contact:

Postby Philip » 26 Mar 2015, 03:45

John I've received a message saying I have a message from you. I can't log in to the forum properly so i can't see it. My email is philip@lemasurier.com

User avatar
Stuart
Posts: 2568
Joined: 11 Mar 2008, 10:43
Location: Dulwich Hill

Postby Stuart » 26 Mar 2015, 10:23

@Philip you have to be logged in to post so you must be logged in :-)

Your link to Private Messages is top right

John Mason
Posts: 46
Joined: 02 Dec 2013, 21:04

Postby John Mason » 03 May 2015, 17:12

Good news!

Last week, the Bianchi distributor came through with a replacement frame at no cost under warranty. Better still it is a brand new version of the Sempre (sempre pro), better than my 2011 model, so I am a very happy customer.

However, cant bear to part with the CAAD 10, and the joy of having a bike to train/commute on, so thanks to Philip i am the proud owner of a Cannondale too.

John

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 03 May 2015, 18:27

Image


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 3 guests