Campag hub+cassette. Free if you have the tool to help

[Drew Vickery]

Campagnolo Daytona (circa 2000) 32 hole rear hub + 9 speed cassette. Free to anyone with the campag cassette tool to help me take it off.
I only want to use the rest of the wheel (with an old shimano 105 hub) so need this gone.
Seems to be in very good used condition, but no promises.

[utopia]

will you be going 9 or 10 speed Shimano 105?
fyi, Campaq 9 speed cassettes will work in a Shimano 9 speed drivetrain setup.... something you might want to consider

[mikesbytes]

Your talking [bike] religious conflict

[Drew Vickery]

7-speed 105. I'm a bit retro.

[utopia]

http://www.ctc.org.uk/DesktopDefault.aspx?TabID=3946
Implies if you execute the hubbub method you can use shimano 7 setup and use , limited to 7 of the 9 gears on the campagnolo cassette.

I've not done hubbub method , but have done campagnolo 9 cassette in shimano 9 setup.
And currently have campagnolo 11 levers operating a shimano 9 setup.

If you still want or need to borrow a campagnolo cassette removal tool, I can take one to the track on wednesday.

[Drew Vickery]

Interesting possibilities, but hub-width is my issue. 126mm for 7 speed vs. 130mm for 8/9/10. I can spring my steel frame 4mm open to squeeze the 130mm hub temporarily, or permanently by cold-setting - but I prefer to keep frame original, unstressed.

Mr/Ms Utopia - I will probably take you up on tool offer some future wednesday. I'm a newbie so it will be a chance for me to check this track thing out. Not for next few weeks -I will PM you well beforehand. Thanks 'drew